Closed Circuit Cooling Tower

Closed circuit cooling tower complete set of equipment by the host, circulating water pump system and electrical control system, etc. closed circuit cooling tower host part by the shell, heat exchanger, fan, spray system, S-type PVC collector, inlet style grille, water bad and other components. Equivalent to the heat exchanger, open cooling tower, circulating water pump system, pool and other combinations into one, compact structure, beautiful appearance, reduce industrial footprint, softened water circulation.

Closed circuit cooling tower working principle is to adopt the principle of indirect heat exchange of spray cooler, high efficiency and energy saving. During the working process, A, cooling medium exchange process, B, spray heat discharge process, C, heat discharge process. closed circuit cooling tower work operation mode has two kinds: air cooling + spray. The two modes are automatically switched by the electronic control system according to the requirements of the working conditions to realize energy saving and consumption reduction.

Closed circuit cooling tower is very water-saving, relative to the original open cooling tower, saving water about 30% above; power saving is mainly closed circuit cooling tower; in the cycle of water pump head reduction and according to the temperature of the water automatically control the fan and the spray pump operation, saving costs about 15%; ecological aspects In terms of ecological environment, there is no white smoke emission, no algae, low water drift rate and water recycling.

Closed circuit cooling tower raw materials into the factory shall be strictly inspected, each batch of materials shall be accompanied by a complete quality certification materials, on the basis of qualified, our company will also take samples of closed circuit cooling tower material sampling, to ensure the quality of raw materials. In order to ensure the long-term stable operation of closed circuit cooling tower, need to focus on the maintenance of closed circuit cooling tower coil cleaning: every 3-6 months (according to the water quality) with high-pressure water or chemical cleaning agent rinse the outer surface of the coil to remove scale, algae or impurities (scaling will make the heat transfer efficiency decreased by 20% - 30%). 30%);

Hot Tags: closed circuit cooling tower, China closed circuit cooling tower manufacturers, suppliers, factory, Closed Loop Circuit Cooling Tower, Basic Closed Circuit Water Cooler, Closed Circuit Water Cooling System, Composite Closed Type Cooling Tower, Closed Circuit Fluid Cooler, Composite Flow Closed Cooling Tower