Dry and Wet Combination Closed Cooling Tower
Frame material: generally galvanised or 304 type material
Pump type: generally centrifugal pumps or self-priming pumps
Heat exchanging area: about 20-800m2
Electricity condition: about 380V 50Hz
Empty weight: about 3-10.5t
Easy maintenance: coil material is corrosion-resistant, low long-term running cost
Fan factor: selection according to air flow, static pressure and noise Comprehensive consideration
Shell design: to meet the waterproof, dustproof, anti-corrosion, etc.
Packing role: to increase the contact area between water and air
Products Description
Dry and wet combination closed cooling tower combines the characteristics of dry cooling and wet cooling, Dry and wet combination closed cooling tower in the work, the cooling water in the closed heat exchanger tube flow, the air in the fan under the action of the flow through the Dry and wet The air flows through the Dry and wet combination closed cooling tower under the action of the fan.
In low load or cold environment, Dry and wet combination closed cooling tower system only enable dry cooling section, through the Dry and wet combination closed cooling tower finned tube metal wall for sensible heat exchange, this time no water evaporation, can minimise water consumption. There is no water evaporation at this time, which can minimise water consumption. When the heat load rises or the ambient temperature is high, Dry and wet combination closed cooling tower spraying system is activated, spraying water to the surface of the heat exchanger tube and filler layer, water evaporation takes away a large amount of latent heat, and the cooling effect of Dry and wet combination closed cooling tower is significantly enhanced. The cooling effect of Dry and wet combination closed cooling tower is significantly enhanced.
Dry and wet combination closed cooling tower of the two modes can run independently or joint work, Dry and wet combination closed cooling tower through the intelligent control system dynamic adjustment, not only to ensure the cooling efficiency, but also reduces the operating costs. Dry and wet combination closed cooling tower this design is to ensure the cooling efficiency, but also to reduce the operating costs. Dry and wet combination closed cooling tower this design is especially suitable for use in areas with limited water resources, widely used in industrial cooling, data centres and other fields.
Hot Tags: dry and wet combination closed cooling tower, China dry and wet combination closed cooling tower manufacturers, suppliers, factory, Closed Loop Circuit Cooling Tower, Basic Closed Circuit Water Cooler, Closed Circuit Water Cooling System, Composite Closed Type Cooling Tower, Closed Circuit Fluid Cooler, Composite Flow Closed Cooling Tower
You Might Also Like
Send Inquiry