Wet and Dry Combined Closed Cooling Tower
Three modes: dry heat exchange, wet heat dissipation, dry and wet combined operation
Water temperature control: real-time monitoring, display in the integrated control cabinet
Design life: the main components are greater than 20 years
Equipment operating pressure: 0.1-0.6MPa or so
Electricity conditions: 380v 50Hz
Tower shell: 2mm thick
Power descaling: to achieve the ST2.5 level
After-sales service: Warranty period 1 year from the date of installation, lifelong maintenance Product Brand: LZBF
Products Description
The Wet and dry combined closed cooling tower improves cooling efficiency by integrating the advantages of both types of cooling equipment while rationalising the use of water resources, reducing costs and eliminating plumes at the outlet of the wet cooling tower. The Wet and dry combined closed cooling tower system dynamically adjusts the ratio of wet and dry modules according to the operating conditions, which effectively reduces the plume pollution generated by the wet cooling tower. As of 2025, the core configuration of the Wet and dry combined closed cooling tower consists of a wet and dry tandem.

Product advantages of Wet and dry combined closed cooling tower
Dry coil: zero water consumption, no scale outside the tube, high temperature on the direct drop, Wet and dry combined closed cooling tower make full use of the project's local characteristics of the low air temperature, the use of air will be rotting wet media, reduce the temperature by about 2 to 4 degrees, Wet and dry combined closed cooling tower. ~ 4 degrees, Wet and dry combined closed cooling tower is completely zero water consumption.
Wet: high efficiency, temperature difference, less investment, Wet and dry combined closed cooling tower will circulate media down to the required temperature of the production process, reducing the investment in dry coils.

Wet and dry combined closed cooling tower application scenarios:
Northwest region: water-scarce arid areas, Wet and dry combined closed cooling tower can reduce water consumption, but also reduce the cost of the branch;
Power-rich areas: due to the dry operation, the air required air volume Large, fan motor work is also relatively large, electrical energy consumption, Wet and dry combined closed cooling tower for wind power, hydropower and tidal, nuclear power-rich areas, more suitable.
Hot Tags: wet and dry combined closed cooling tower, China wet and dry combined closed cooling tower manufacturers, suppliers, factory, Closed Loop Circuit Cooling Tower, Basic Closed Circuit Water Cooler, Closed Circuit Water Cooling System, Composite Closed Type Cooling Tower, Closed Circuit Fluid Cooler, Composite Flow Closed Cooling Tower
You Might Also Like
Send Inquiry







