Packing of cooling tower
Sep 22, 2025
Leave a message
The secret to improving performance
Extremely low water temperature
Good fillers allow water to stay in the tower for longer, have a larger contact area, and exchange heat more fully. In this way, the outflow temperature can be many, many degrees lower than that of traditional cooling towers! For example, in high temperature weather, the outflow temperature of the ordinary cooling tower may still be high, and after using high-quality filling, the outgoing temperature can be directly reduced, which has a great effect!
Reduce drift rates
The drift rate is the amount of water being blown away by the wind. The special design of high-quality fillers effectively reduces water dispersion, allowing water to carry out its cooling tasks inside the tower instead of being blown everywhere by the wind. In this way, not only does water waste be reduced, but also pollution of the surrounding environment is avoided, which is a win-win!
Energy saving experts
Don't underestimate the role of the filling, it can also save you a lot of electricity bills! Because the filling improves the cooling efficiency, the fan does not need to work so hard, and the rotation rate naturally comes down. As soon as the speed is reduced, the energy consumption is also reduced, and in the long run, a noticeable reduction can be seen on the electricity bill.
How often should the packing of cooling tower be changed?
The replacement cycle of the packing of cooling tower is mainly determined by the service condition and the service condition. Under normal conditions and good water quality, plastic fillers can usually be used for 5 to 8 years. However, in harsh environments, such as industrial areas with high pollution, high corrosion or poor water quality and poor maintenance, fillers may need to be replaced in as little as three to five years. High-quality fillers, made of special materials or advanced processes, can last as long as 8 to 10 years or longer.
Steps of replacement
Pre-preparation: Choose the right filling according to the model and size of the cooling tower. The common filler material is PVC, PP, glass steel and so on. Prepare the tools needed to install the filling, such as screwdrivers, wrench, scissors, etc.
Downtime and emptying: Turn off the power and water supply to the cooling tower and empty the cooling medium after ensuring safety.
Dismantle old fillings: Carefully remove the lids and old fillings of the cooling tower. Be careful not to damage other parts. Clean up residue and dirt.
Install new fillers: Install the new fillers according to the design and specifications, ensuring there is sufficient gap between the fillers to allow the cooling medium to pass smoothly.
Restore operation and inspection: Restart the cooling towers to check the solidity and operation of the filling to make sure there are no leaks or abnormalities.
Reason for replacement
The packing of cooling tower will be affected by many factors in the long term use. The main reasons include:
Sulfur: calcium carbonate tartar is attached to the filling, which affects heat exchange.
Sinking: The filling is contaminated with heavy sludge or breeds algae, making it unusable.
Ageing: The filling gradually becomes brittle due to the erosion of water and air, and is easily broken.
Pollution and blockage: impurities, microorganisms, etc. in the circulating water attach to the surface of the filling, forming dirt and clogging the pores.
Environmental factors: Poor water quality, many pollutants, and many corrosive gases will accelerate the damage of the filling.
The effect after replacement
The replacement of a new filling can significantly improve the heat exchange efficiency of the cooling towers and reduce energy consumption and operating costs. The new fillers typically have better thermal properties and lower resistance, and are able to more efficiently promote heat exchange between water and air. In addition, regularly replacing the filling can avoid the failure of the cooling tower due to problems such as aging and blockage of the filling, and extend the overall service life of the cooled tower.
Send Inquiry





