How Oasis Bingfeng Achieves Energy Saving with Combined Dry-Wet Cooling Towers
Oct 16, 2025
Leave a message
Oasis Ice Peak's combined dry-wet closed cooling tower is not a simple combination of two technologies, but an intelligent collaborative system that enables the "dry" and "wet" modes to exert their respective advantages at the optimal timing, thus achieving the perfect unity of water conservation and high efficiency. Its core principles and operation methods are as follows:

Priority to "Dry Mode": Laying the Foundation for Water Conservation
When the ambient temperature is low or the process cooling demand is not high, the system operates entirely in "dry mode".
Working Principle: It relies solely on air convection. The fan drives the ambient cold air to flow forcibly outside the closed heat exchange coil, taking away the heat of the process fluid inside the coil.
How to Achieve Water Conservation: In this mode, the spray water system is completely shut down, achieving zero water consumption. This is crucial for areas with scarce water resources or high water prices. The ability to easily achieve a water saving rate of over 60% is based on the system's stable operation in this mode during most transition seasons and cool periods.

On-Demand Activation of "Wet Mode": Ensuring High-Efficiency Peaks
When the ambient temperature rises or the process heat generation increases significantly, making dry heat exchange unable to meet the final cooling temperature requirements, the system's "wet mode" is intelligently activated.
Working Principle: The intelligent control system automatically starts the spray system, uniformly spraying water on the outer wall of the heat exchange coil. A large amount of heat is absorbed when water evaporates, which rapidly enhances the heat exchange efficiency.
How to Achieve High Efficiency: The evaporative heat absorption effect of water is far stronger than pure air convection, which can quickly cool the process fluid to a lower temperature. Compared with pure dry operation, the energy efficiency can be further improved by more than 30%, ensuring stable compliance even under the harshest working conditions.

Intelligent Brain Collaboration: Making Decisions in an Instant
The key to achieving the above seamless switching and optimal solutions lies in the "intelligent brain" equipped by Oasis Ice Peak for the system.
Real-Time Monitoring: The system continuously monitors key parameters such as ambient wet bulb temperature, inlet and outlet temperatures of process fluid, and heat load.
Intelligent Decision-Making: Based on preset optimization algorithms, the control system can accurately determine the optimal timing to start or shut down the spray system. It does not pursue rough switching between "dry" and "wet", but finds the precise balance point that uses the least water while meeting the cooling demand.
Smooth Mode Transition: The intelligent system ensures a smooth and stable transition between dry and wet modes, avoiding fluctuations in the temperature of the process fluid and ensuring the continuity of production.
In summary, the successful combination of Oasis Ice Peak lies in:
Not a substitute for "wet type", but an "optimizer": It changes the traditional mode of continuous and large water consumption of wet towers, transforming water use from "normal state" to "on-demand", and fundamentally reconstructing the water use logic.
Cascade utilization of "air first, then water": It gives priority to the use of free air resources, and only uses precious water resources for enhancement when efficiency is insufficient, realizing the cascade utilization of energy media.
Exchanging intelligent control for resource conservation: Through initial hardware investment and advanced control algorithms, it brings users long-term and significant savings in water fees, electricity fees and water treatment chemicals, achieving a win-win situation of economic and environmental benefits.
The combined dry-wet closed cooling tower ushers in a new era of intelligent cooling. The system integrates the energy saving and environmental protection of dry cooling with the strong heat dissipation capacity of wet cooling, achieving a perfect balance between efficient cooling and low energy consumption. Its intelligent control system can automatically adjust the working mode according to environmental changes, ensuring that the equipment is always in the best operating state.
Send Inquiry





