Evaporative Cooler Closed Circuit Cooling Towers
High cleanliness: Coil loop is closed to reduce the possibility of scaling
Ventilation: Mechanical Ventilation
Media Contact: Open and Closed Cooling Tower
Vapour Flow Direction: Counter Flow, Cross Flow, Compound Flow Direction
Heat Transfer Forms: Conduction+Convection+Evaporation Heat Transfer
Equipment Dimensions: Customised
Receiving Forms: Flange Connection
Limit Temperature Reduction: Depending on the Local Wet-Bulb Temperature
Easy Access for Inspection: Inspection Door for Easy Easy maintenance: there is an inspection door for easy maintenance inside the tower.
Products Description
Evaporative Cooler Closed Circuit Cooling Towers work on the principle of evaporative cooling to reduce water temperature.
The process is as follows:
Firstly, the hot water enters the Evaporative Cooler Closed Circuit Cooling Towers through the water inlet into the packing layer inside the Evaporative Cooler Closed Circuit Cooling Towers body, which is usually composed of a series of Evaporative Cooler Closed Circuit Cooling Towers units The packing layer is typically made up of a series of Evaporative Cooler Closed Circuit Cooling Towers, which are used to increase the contact area between the water and air in the Evaporative Cooler Closed Circuit Cooling Towers. Hot water is evenly sprayed from the top of the Evaporative Cooler Closed Circuit Cooling Towers onto the packing layer, forming a thin film of water, and then due to gravity, the water flows downward along the surface of the Evaporative Cooler Closed Circuit Cooling Towers packing layer. flow downwards along the surface of Evaporative Cooler Closed Circuit Cooling Towers packing layer. At the same time, an external fan blows air into the Evaporative Cooler Closed Circuit Cooling Towers. As the air passes through the packing layer, it exchanges heat with the falling water film, and the heat in the water in the Evaporative Cooler Closed Circuit Cooling Towers is transferred to the air, causing the water temperature to drop. In the process, part of the water evaporates into water vapour, which further takes away the heat, thus achieving the cooling effect. Finally, the cooled water falls into a collection tank and is pumped back to the sprinkler system for reuse.
Evaporative Cooler Closed Circuit Cooling Towers is a kind of high efficiency, energy saving, low noise cooling equipment, and Evaporative Cooler Closed Circuit Cooling Towers are widely used in a variety of occasions needing circulating medium cooling. The Evaporative Cooler Closed Circuit Cooling Towers are widely used in a variety of applications requiring circulating medium cooling.
Hot Tags: evaporative cooler closed circuit cooling towers, China evaporative cooler closed circuit cooling towers manufacturers, suppliers, factory, Closed Loop Circuit Cooling Tower, Basic Closed Circuit Water Cooler, Closed Circuit Water Cooling System, Composite Closed Type Cooling Tower, Closed Circuit Fluid Cooler, Composite Flow Closed Cooling Tower
You Might Also Like
Send Inquiry