Closed Air Circuit Water Cooled
Shower head: to ensure the spray effect, the spray nozzle using ABS material injection molding of the new flower orchid nozzle
Water tank: 316L stainless steel, etc.
Wet bulb temperature: depending on the product where the use of
water treatment: 10-400m3 / h or so
Heat exchanger group: 1-2 groups
Shower system: the spray pump, connecting piping, spray pipes, spray nozzle composition
Heat exchanger Design: anti-freezing type design, anti-friction design
Inlet and outlet temperature difference: customized according to customer needs
Shower pump grade: insulation grade ≥ F, protection grade not less than IP55
Internal head loss: not more than 10m
Products Description
Closed air circuit water cooled is divided into two parts of the cycle:
Inner Circulation Water System: The cooled circulating water inside the coil flows out from the tower of Closed air circuit water cooled, and is sent to the heat source (the cooled equipment) by the system circulating pump, and the warmed up circulating water after heat exchange enters into the coil for cooling again.
External water circulation system: the external spray water through the Closed air circuit water cooled coil and filler contact heat transfer to achieve the purpose of cooling the coil internal circulating water, fall into the lower tank, by the spray water pump to the spray water tank again cycle. With the pipe outside the shower water and air for heat and quality exchange, to avoid the cooled water and air directly in contact with the water pollution caused by. As the spray water through the PVC filler pre-cooling but, its heat exchange effect is more obvious.
Closed air circuit water cooled its cooling technology through media isolation, cycle optimization, material upgrading and other means, in the field of industrial cooling to achieve a balance of high efficiency, reliability and environmental protection. Specific Closed air circuit water cooled selection needs to be combined with the cooling object, environmental conditions and cost budget comprehensive assessment, if necessary, can refer to the manufacturer to provide energy efficiency simulation and customized solutions.
Closed air circuit water cooled all supporting fans, motors and structures, can meet the use of regional climatic conditions, motor selection of outdoor motors, the use of large domestic manufacturers of products, protection level of IP55, insulation class F, to ensure that the production of Closed air circuit water cooled normal operation. Closed air circuit water cooled fan blade adopts aluminum alloy blade, Closed air circuit water cooled fan drive form for direct connection fully enclosed airflow type, maintenance-free.
Hot Tags: closed air circuit water cooled, China closed air circuit water cooled manufacturers, suppliers, factory, Closed Loop Circuit Cooling Tower, Basic Closed Circuit Water Cooler, Closed Circuit Water Cooling System, Composite Closed Type Cooling Tower, Closed Circuit Fluid Cooler, Composite Flow Closed Cooling Tower
You Might Also Like
Send Inquiry